Acetronics                                                                 Do It Yourself Supplies

DIY PCB supplies from Acetronics Australia
     
    Quick Index
  1. Photosensitive Copper Clad to make your own PCB's 
  2. Raw copper clad stock 
  3. IC Board (Stand alone) ready made circuit board to hold 16 pin IC 
  4. Drill holder. Rack to hole carbide drills. 
  5. Prototyping breadboards. 
  6. Routers and Mills. 
  7. Carbide Drills. 
  8. Project Boards. Ready made for Electronics Australia projects. 
  9. Aluminum Plate. Sheets to make front panels etc. 
  10. Post and Pack Pricing. 

Hobby Boards:
We Stock a comprehensive range of PCB's for projects in Electronics Australia & ETI. Call for Prices!

Easy ID 16 Pin IC Board.
Add an IC socket and you have a long lasting holder for many projects. Designed to make identifications of pins easier. Comes in FR4 1oz 1.6 Epoxy. The board is etched , drilled and soldered. Ready for instant use.
IC 54x35mm Board
Cat No. : E16-1		 2 in 1 Board
Cat No. : E16-2		 3 in 1 Board
Cat No. : E16-3		 4 in 1 Board
Cat No. : E16-4

DFP COPPER CLAD.
Photo-Sensitive Coating Similiar to Riston. FR4 1.6 Quality Epoxy. DRY FILM (Photosensitive Copper Clad) is Made in Australia by ACETRONICS for resale and inhouse PCB Production.

Single Sided Board

 
Size One Pack Five-Pack
610x304 mm CAT No: SSA1 CAT No: SSA5
305x304 mm CAT No: SSB1 CAT No: SSB5

Double Sided Board

 
Size One Pack Five Pack
610x304 mm CAT No: DSA1 CAT No: DSA5
305x304 mm CAT No: DSB1 CAT No: DSB5

The Above requires B/W or orange film negative. Developer 50gms makes 5 litres, can be used cold. CAT: D50
NB: Developer is free with your first order! (With purchases over $17)

 Any household caustic or Metho, available in hardware stores can be used as a stripper. Exposure is by UV source, such as blacklight flouro tubes, sunlight. Expose for 10 seconds plus, depending on UV strength. (The Average is 25 seconds.) The difference between this coating and others is that the ACETRONICS coated board is a lot cheaper and a lot easier to use, with much better results.

HAVING DIFFICULTIES DEVELOPING PHOTOSENSITIVE COPPER CLAD?
Do yourself a big favour and try ours. It's a breeze!

Bare Copper Clad Board - FR4 1.6 Epoxy

 
Size Single Sided Double Sided
610x304 mm CAT No: DSP-1 CAT No: DSP-1854
305x304 mm CAT No: DSP-2 CAT No: DSP-927
305x152 mm CAT No: DSP-3 CAT No: DSP-436
152x152 mm CAT No: DSP-4 CAT No: DSP-231

Routers & Mills

Tungsten Router/Milling/Drill. 1/8th (3.175mm)Shank

Style 141 Routing bit with fishtail end. Suit Milling as well. Has center flute for chip removal.

Sizes : 0.8mm - 3.175mm 

Tungsten Router/Milling/Drill. 1/8th (3.175mm)Shank

Style 241 Suit Routing of Aluminium, Acrylic (Perspex), plastics etc.

Sizes : 0.8mm - 3.175mm 

Carbide Drills with 1/8 Shanks
Size Cat No.:
0.8 - 1.0 DRL08-10
1.2 - 3.175 DRL12-31
3.2 - 3.5 DRL32-35
3.55 - 4.5 DRL35-45

Increments of .1 only. eg .8, .9, 1.0. Smaller sizes available, Price on application.

PROTOTYPING BREADBOARD

High quality Fiberglass available with Pads only or with tracks and Pads. Please specify when ordering. Please enquire about custom made breadboards to your specifications. 2.54 grid spacing. 1mm holes to span many lead sizes. FR4 1oz 1.6mm Epoxy substrate. This is a high quality board as used by manufacturers and is semi-opaque.

Size Single Sided Cat No. Double Sided Cat No.
147x86mm 1792 Holes PROSS-1 PRODS-1
147x171mm 3584 Holes PROSS-2 PRODS-2
171x294mm 7168 Holes PROSS-3 PRODS-3

ALUMINIUM PLATE

295 x 295mm Sheets
Thickness: 1.2mm (18g) to 1.6mm, Mill finish or Anodised (Natural)

 
  Just email us for current prices!
Bulk and Trade Discounts Available - Call us!

   * Best viewed 800x600 Resolution Explorer or Netscape 4.x with Java Enabled.       Email Acetronics